ESD Vinyl Tile Maintenance

Made for these Environments

Printed Circuit Production
Computer Control Rooms
Process Control & Survey Rooms
Switchboard Assembly
Lithography & Printing
Health Care
Electronic Device Testing
Raised Floors
Industrial / Warehouse Areas
Micromechanics
Electronic Manufacturing
Clean Rooms

100% Repairable
Deep and long scratches, holes, burns and other more or less severe surface damages on ColoRex® can be simply and effectively repaired, without leaving any trace and without affecting the ESD protective
properties.

100% repairability is possible due to the perfect homogeneity of ColoRex® and the low content of
plasticizer.

burns and scratches

repair

abrasive cleaning
Surface damages like burns, dulling or discoloration caused by chemicals, stubborn stains and alike can be perfectly removed by abrasion using a normal eccentric grinding machine. Proceed in several steps, starting with a coarse sand paper disk and-finishing with a fine grade one. Complete the operation by polishing the repaired spot with a red pad, this will restore the original surface quality of ColoRex®.

homogeneous welding
Deep scratches and other physical damages of the ColoRex® tiles can be repaired by homogeneous welding. Cut a strip of ColoRex® from a tile of the same color reference of the one being repaired, slide the strip into the special flat welding nozzle of a hot air gun and gently weld it straight into the damaged spot, setting a temperature of approx. 400-450°C. Remove the excess material with a sharp crescent shape knife and complete the operation by sanding and polishing the repaired spot.