Forbo Tile Forbo Tile
top nav
 
ESD Vinyl Tile Colors ESD Vinyl Tile Features ESD Vinyl Tile Specifications ESD Vinyl Tile Construction  
Home Contact Site Map
Order ESD Vinyl Tile
ESD Vinyl Tile Installation
ESD Vinyl Tile Maintenance
ESD Vinyl Tile Heat Welding
ESD Vinyl Tile Technical Documents
Contact ESD Vinyl Tile
Made for these Environments
  • Printed Circuit Production
  • Computer Control Rooms
  • Process Control & Survey Rooms
  • Switchboard Assembly
  • Lithography & Printing
  • Health Care
  • Electronic Device Testing
  • Raised Floors
  • Industrial / Warehouse Areas
  • Micromechanics
  • Electronic Manufacturing
  • Clean Rooms
specs
  SD Static Dissipative EC Electrostatic
Classification
EN 685
EN 649


34          43
Thickness
EN428
0.080" (2.0 mm)
3.0 mm*
Size of Tiles
EN 427
24" X 24" (61 cm x 61 cm)
61.3 x 61.3 cm*
122.6 x 61.3*
Dimensional stability
EN 434
lengthwise / crosswise 0.05%

Residual indentation
EN 433 / DIN 51955
Static Load Limit
ASTM F-970


0.035 mm

exceeds 1500 psi
Wear resistance
EN 660.1 / DIN 51963

Wear group M
Effect to castor chair
EN 425

no damage
Slip Resistance
DIN 51130
Federal Standard and A.D.A requirements
prEN13 893

R9
meets or exceed 0.6 for flat surface

µ = 0.89
Electrical resistance
DIN 51953
EN 1081
IEC 61340
EOS/ESD S7.1
ESD STM 97.1 (with ESD shoes)

106 ≤ R ≤ 108 Ω
R ≤ 108 Ω
106 ≤ R ≤ 108 Ω(DIF)
106 ≤ R ≤ 108 Ω
-

5 x 104 ≤ R ≤  1 x 106 Ω
R ≤  1 x 106 Ω
5 x 104 ≤ R ≤  1 x 106 Ω(ECF)
2.5 x 104 ≤ R ≤ 1 x 106 Ω
7.5 x 105 ≤ R ≤  1 x 107 Ω
Body voltage generation
ESD STM 97.2 (with ESD Shoes)

≤ 70 Volt

≤ 30 Volt
Outgassing
IDEMA M11-99
TD-GC-MS results available on request
Fire resistance
DIN 4102 / B 3810 / B 3800
ASTM E 648 / NFPA 253
ASTM E 662 / NFPA 258

difficult to ingnite/ low smoke development
B1 / Q1
class 1 (1.1 Watts / cm2)
450 or less

Heat resistance
DIN 52612

0.011 m2 K/W**
Color Fastness
ISO 105 B 02, Met. 3 - DIN 53389

7-8
Resistance to chemical
EN 423 / DIN 51958
Offer good resistance to acid, alkalis, oils, petrol, alcohol and white spirit. When applied for a longer period (>24 hours) less resistance to certains other solvents such as aromatics (toulene, benzene), esters (ethylacetate), ketones (acetone) and chlorinated hydrocarbons. Detailed list available on request.
Ease of decontamination
DIN 25415-1 / ISO 8690

excellent
Recyclable
yes

Fulfills product requirement
EN 649
SS-T-312B


yes
meets or exceeds
* Upon request    ** suitable for floor heating systems               technical data may be subject to change

Technical Data

Federal Specifications
Meets or exceeds performance characteristics of SS-T-312B and ASTM F1700

Electrical Resistance: ASTM 150/EOS/ESD S7.1
Electrostatic Conductive - 2.5 x 104 to x 106
Static Dissipative - 1 x 106 to 108

Static Decay: FTMS 4046 (101C) 5,000 to 50 Volts
EC - Less than 0.01 seconds
SD - 0.01 seconds

Static Propensity: AATCC-134
EC/SD - Less than 50 volts

Static Load Limit: ASTM F-970
1500 Pounds per square inch.

Slip Resistance
Meets or exceeds Federal standards and A.D.A. recommendations of .6 for flat surfaces.

Flexibility
Meets or exceeds Federal Specification SS-T-312B, Type III, Vinyl Tile.
Meets or exceeds ASTM F1700

Fire Resistance
ASTM E-662/NFPA 258 (Smoke Density) - 450 or less
ASTM E-648/NFPA 253 (Critical Radiant Flux) - Class i

CONSTRUCTION
Colorex shall be of homogeneous construction, sliced from a pressed vinyl block to assure a highly flexible tile of dense construction, dimensionally stable, extremely hardwearing, with a completely non-directional pattern.

PHYSICAL CHARACTERISTICS
(dimensions are approximate)
Tile size ................... 24" x 24" (61 cm x 61 cm)
Gauge ........................... .0.080" (2.0 mm)
Carton contents ... .14 tiles (56.07 sq. feet; 5.21 sq. meters)
Select colors available in 613 cm x 613 cm for Access Panels.
Also available in pre-grooved and 2 ft. x 4 ft. (61 cm x 122 cm) tiles upon request.

TEST PROCEDURES
Completed Installation System should be tested "Surface to Ground" according to ASTM F-150 or EOS/ESD S7.1. Forbo Linoleum offers free testing with warranty registration for every job.


CHEMICAL RESISTANCE
Sulfuric Acid (Conc.) 95%
Sulfuric Acid (77%)
Sulfuric Acid (5%)
Nitric Acid (Conc.)
Nitric Acid (5%)
Hydrochloric Acid (Conc.)
Hydrochloric Acid (5%)
Acetic (Conc.)
Acetic (5%)
Sodium Hydroxide (50%)
Ammonium Hydroxide (28%)
Methyl Alcohol
Ethyl Alcohol
Butyl Alcohol
Phenol
Benzene
Xylene
Cresol
Gasoline, Mineral Oil
Chloroform
Carbon Tetrachloride
Trichlorethylene
Acetone
Methyl Ethyl Ketone
Amyl Acetate, Ethyl Acetate
Silver Nitrate (40%)
Ethyl Ether
Formaldehyde (40%)
Iodine
No effect
No effect
No effect
Very slight surface attack
No effect
No effect
Very slight dulling
No effect
No effect
No effect
No effect
No effect
No effect
No effect
Very slight surface attack
No effect
No effect
Very slight surface attack
No effect
No effect
No effect
No effect
No effect
Slight surface dulling
No effect
Slight brown stain
No effect
No effect
Yellow stain
samples estimation
Copyright © 2007 ForboTile, Inc.
Questions/Comments About this Site??
An ESD Vinyl Tile division of Ground Zero Electrostatics
home | colors | features | specifications | construction | techdocs | installation | order